Seattle City Light Increases Power Factor Penalty

Facilities served by Seattle City Light have a new target when it comes to using power effectively.  As of January 1st, 2014, all consumers whose power factor falls below .97 will be charged $.15/kVarh.  This is an increase from the previous target of .95 and one of the highest in the nation.

Power factor is the ratio of working power to apparent power and measures how effectively power is being used.  Low power factor has a number of implications, in addition to charges from utilities.  It can reduce total system capacity, voltage and efficient use of power.

To counteract low power factor, a variety of solutions have been employed.  The most commonly known is the introduction of power factor correction capacitors.  However, it is generally encouraged to develop a power study to understand the causes and the expected benefits of solutions.

Solutions Slider

AMVAC Feature

AMVAC Slider

Retrofit Panelboards Save Significant Construction Costs

Challenge:

A healthcare facility located in the Puget Sound region was faced with significant construction costs as a change in their main service  increased the fault current above the ratings of some legacy panelboards.  Some panelboards were embedded in concrete and to swap them out could have meant serious structural changes.  To make the situation more difficult, not any circuit breakers would solve the situation as selective coordination needed to be maintained for this hospital. [Read more…]

Other Solutions

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Nam lobortis leo mi, ornare dictum tellus congue at. Praesent at lorem viverra, aliquam ligula feugiat, dictum nunc. Sed nisl nisi, ornare at condimentum a, tristique quis enim. Quisque id pharetra lectus. Suspendisse ac neque id dolor egestas imperdiet. Morbi vehicula nulla id ligula molestie condimentum. Cras sit amet arcu accumsan, vestibulum massa mattis, ornare sapien. Curabitur tristique eget mi nec sagittis. Fusce sollicitudin a velit et scelerisque. Ut lobortis porta neque nec commodo. Aliquam id quam eu nibh luctus egestas.

Morbi metus felis, lobortis vel nunc a, feugiat placerat tellus. Vivamus condimentum turpis dolor, nec cursus purus laoreet in. Nullam purus dui, porta eu hendrerit eget, ullamcorper vitae justo. Pellentesque eu semper massa. Mauris tempus blandit nibh et fermentum. Aliquam consequat sagittis leo sed consequat. Nullam aliquam scelerisque sem id cursus. Ut cursus, nisi in bibendum adipiscing, arcu mi lobortis neque, in gravida ligula orci quis massa. Nam porta massa in ipsum vehicula posuere. Etiam rhoncus metus mauris. Ut posuere cursus mi. Pellentesque habitant morbi tristique senectus et netus et malesuada fames ac turpis egestas. Duis eu lobortis augue, ut eleifend nisl. [Read more…]

GE Odyssey Plans Puget Sound Visit

GE’s Industrial Solutions business is bringing the latest industrial products, services and aftermarket solutions to our customers. The GE Odyssey Tour will be on the road for 100+ days this year.

The GE Odyssey showcases the latest GE technologies and services that can help you improve your facility safety, productivity, and reliability. Once you step on board, you will be able to see, test, and touch our products including drives, circuit breakers, switchgear, motor control centers, and critical power equipment as well as our complete portfolio of services.

GE Odyssey will be in the Puget Sound area on 9/18 and 9/19. For more details or to RSVP, please contact your Access Electric Supply representative.

http://www.geindustrial.com/odyssey/aboutus.htm

GE Introduces New TLE Series UPS with Industry-Leading Efficiency and High Output Power

To meet the growing power needs of mission-critical facilities, GE (NYSE: GE) today introduced its new TLE Series uninterruptible power supply (UPS) global platform. The TLE Series transformer-less, three-phase UPS applies GE’s innovative technology to provide facilities with best-in-class operating efficiencies – up to 97 percent efficiency in double-conversion mode and up to 99 percent in eBoost, also known as multi-mode , operation. By operating at such high efficiencies, the TLE platform helps lower system operating expenses and power usage effectiveness (PUE). In addition, the TLE Series delivers clean power quality, including low-input harmonics, high-input power factor and low-output voltage distortion, to the critical loads.

GE’s TLE Series provides mission-critical facilities such as data centers, healthcare facilities and financial institutions with the broadest range of double-conversion output power available in the industry today – ranging up to 1.5 megawatts (MW) in a single module. To meet customers’ reliability, efficiency and power demands worldwide, the TLE Series is offered in both UL and CE versions. The CE version spans up to 1.2 MW, while the UL version ranges up to 1.5 MW. The TLE 160-kilowatt (kW) to 400-kW, CE-rated products are available now; and the UL-rated products will be available throughout 2013 with the higher power ranges available in 2014.

The platform offers an unprecedented level of power density, a measure of the amount of power output compared to the product’s size or footprint, which reduces the overall capital expense of installation. The small footprint makes the TLE ideal for both new construction and retrofit applications where space optimization is a priority.

ABB North America releases Protective Relay School webinar series 2013 calendar

ABB has released the schedule for the 2013 Protective Relay School webinar series. Now in its third season, this webinar series has become a trusted instructional resource for literally thousands of industry practitioners.These educational 90 minute sessions are presented live by subject matter experts and encourage interaction between the instructor and participants. They are an efficient overview of fundamental protection and control principles, as well as important aspects of the digital substation.

In addition to protection and control fundamentals for line distance and differential, generator, transformer, busbar, feeder, motor and IEC 61850, several new webinars have been added to this year’s schedule. New to the 2013 calendar are topics such as:

  • Wide area measurement
  • Digital substation
  • Volt-VAr optimization
  • Wireless communication fundamentals

The ABB Protective Relay School webinar series is free to industry professionals and will run from Jun 18, 2013 to February 2014. To view webinar calendar, course descriptions and to register, visit http://bit.ly/19lAGdY

GE Odyssey – coming to the Puget Sound

http://www.accesselectricsupply.com/publications/

Our Approach